PDF
ZIP
available with
Teflon
on lead style,
See page with
"RTD Elements with
Lead Wires Attatched"
(page C-12).
The following shows where some
of these instruments can be found
in this catalog:
and Series F OMEGAFILM
machine screws and other
metal holders. Please contact
OMEGA's Applications Engineering
Department about other
custom assemblies.
11 to 24 units . . . . . . . . .10%
25 to 49 units . . . . . . . . .15%
50 to 99 units . . . . . . . . .20%
100 units and up . . . . . . .25%
larger than
actual size
ceramic, cylindrically shaped
elements for use in the temperature
range from -50 to 600°C (-58 to
1112°F). Elements have .015"
gold palladium alloy leads
approximately 0.4" long, which
are strain relieved in the stress free
ceramic body. Elements are available
in both single and dual configurations
with resistances at 0°C (32°F) of 100,
200, 400, 500, 1000 and 2000 ohms.
Calibration conforms to standard DIN
43760 with 0.1% resistance tolerance.
Resistance vs. Temperature values
are shown in the technical section.
Series F. Series F are small, thin, flat
ceramic encased elements with strain
relieved leads approximately 10 mm
(0.4") long. Temperature rating is
from -50 to 600°C (-60 to 1110°F).
Calibration is to DIN standard 43760,
0.1% tolerance. Available in a single
winding configuration with a choice
of 100, 500 and 1000 ohm resistance
at 0°C (32°F). Series F elements
yield a superior approach to
accurate, reliable, surface
temperature measurement.
shaped 100 ohm RTD element
offers fast, accurate temperature
measurement as well as a
convenient means of attaching to
a surface without cement. These
highly versatile units can be secured
to a surface by a machine screw and
washer or by a rivet. They can also
be directly cemented with or without
the use of a vertical centering post.
Rated temperature is from -50 to
850°C (-58 to 1562°F). Accuracy
and speed of response are enhanced
by locating the winding deposition
only 0.007" beneath the mounting
surface. The rugged ceramic body,
with firmly strain relieved 0.015"
diameter platinum, is designed to
withstand high vibration conditions.
This versatile 100 ohm unit meets
DIN standard 43760, "0.1%"
resistance tolerance. Resistance vs.
Temperature tables and polynomials
are shown in the technical section.
11 to 24 units . . . . . . . . .10%
25 to 49 units . . . . . . . . .15%
50 to 99 units . . . . . . . . .20%
100 units and up . . . . . . .25%
larger than
actual size
